PRODUCTS
We provide skilled operational support, so you get optimal performance from your ropes. Technologist Oil Services Sdn Bhd, owns a selection of specialized tools and machines, some machines can be deployed to be used at different locations. A prime example of such a transportable machine is our heavy-duty spooling installation. In principle the machine is a reel which can (un)wind cables. The machine can be used for the installation and/or decommissioning of steel wire ropes. It can also be used to wind up steel wire rope on to spools for transport for example. The advantage of this machine is that it allows the user to install or remove reels without the use of a crane and it has the ability to create back tension in the steel wire rope. The installation is always accompanied by one of our experienced employees to operate the machine on site.
TOS Reconditioning of steel wire ropes. At our facility in Kemaman Supply Base and Labuan it is not only possible to produce hoisting equipment, we also carry out maintenance. Over the years we have perfected techniques which ensure that all types of steel wire ropes are suitably protected against corrosion. First the steel wire ropes are freed of dirt and grime, then they are re-lubricated and identified according to the customers specifications. All of this is done through our unique and purposely built systems and equipment, which handle your materials with the necessary care. Further, our systems were developed and built with consideration to environmental issues such as pollution.
TOS Drill String Straightening Services Bent drilling tubulars are common in the drilling industry, and TOS is equipped to handle straightening of any drill pipe, heavy weight drill pipe or drill collar. Straightening is typically done during inspection to allow for possible machine shop work on connections. Extreme bends are addressed before inspection. Individual tubulars are placed in a hydraulic press to carefully and accurately correct the tubing while maintaining integrity
TOS Half-height Container Access Stile Description Our innovative aluminum stile has a 150kg capacity and is suitable for accessing all low level, half-height containers, baskets, and skips. Being of aluminum construction, this ladder can be used in even the harshest environments without the risk of corrosion. Key FeaturesOne piece access/egress solution suitable for half-height containers Suitable for most types of half-height containers, skips & baskets Lightweight aluminum construction (12kg) Easily lifted by one person Checkered material on steps for maximum grip Handle on one side for use when in operation Adjustable threaded securing tighteners prevent movement when in use
TOS Hydrostatic Testing Hydrotesting is another pressure testing option where a liquid (usually water) is injected into a pipe system to check for structural aws permitting leakage. Hydrostatic testing allows the detection of leaks that only become obvious at elevated operating pressures. What Is Hydrostatic Pressure Testing? In hydrostatic pressure testing a liquid is used to check for leaks before putting a pressure vessel or pipeline into service. The liquid is pressurized within the pipeline or vessel to make sure that it can withstand the pressures of normal usage. Hydrostatic Pressure Test Procedure In hydrostatic pressure testing, a liquid is used to check for leaks before putting a pressure vessel or pipeline into service. The liquid is pressurized within the pipeline or vessel to make sure that it can withstand the pressures of normal usage. In order to test, the pipe or pressure vessel must be filled with a liquid. The liquid used is typically water unless water will damage the pipe or vessel. To meet ASME hydrostatic test requirements, before the test begins, the high points of the pipe or vessel must have vents to allow any air to escape as water is added. All air must be cleared before the test can be completed. Hydrostatic Pressure Testing for Pipes and Pressure Vessels For testing, All air must be cleared before the test can be completed
TOS Drilling Paddle for Endurance Test
TOS Thread Protector Removal Tool has been rigorously tested and applied in a variety of settings for the removal of all Pin and Box thread protectors. This innovative system is kind and is set to revolutionize the industry with its capabilities. Benefits of our Tool SAFETY"- Reduces/eliminates injury associated with the repetitive nature of manually removing thread protectors. COST SAVINGS"- Manual removal of Box & Pin protectors on 300 joints equals 3 hours of rig time “Deepening on tubular sizes and connections” EFFICIENT"- Our removal tool able to handle 22 thread protectors removed per minute. CONVENIENT"- Portable & lightweight less than 3 kgs tools with a user-friendly operating interface. Possible Applications Service Rigs, Drilling Rigs Manufacturing Plants, Inspection Facilities Pipe yardsPower Tong Operations
TOS Testing Handrail Strength, Guardrail Balustrade & Barrier Inspection Collective protection systems such as handrail, guardrail, balustrade and barriers are an essential choice when considering fall protection. Within the workplace these items are classed as work equipment. The Provision and Use of Work Equipment Regulations (P.U.W.E.R) 1998 require the “Duty Holder” to ensure that any work equipment provided is: Suitable for use, and for the purpose and conditions in which it is used Maintained in a safe condition for use so that people’s Health and Safety are not at risk; and Inspected in certain circumstances to ensure that it is, and continues to be safe for use It is the duty holder’s responsibility to ensure that prior to use, equipment provided is inspected by a competent person. Our directly-employed and fully trained engineers have extensive expertise in carrying out guardrail testing, handrail load testing and inspections of collective protection systems to ensure maximum safety for your staff and contractors. They can also assist in testing handrail strength. It is therefore essential to have your Collective Protection Systems inspected on a regular basis, by a competent company, such as TOS These inspections provide peace of mind and help reduce the risks to workers. It is recommended that collective protection should be tested and inspected at frequencies not exceeding 6 months.